Rating: 4.8 / 5 (1440 votes)
Downloads: 31075
>>>CLICK HERE TO DOWNLOAD<<<
Lower tolerance ( iso 1) generates a fine fit without a gap on the flanks between screw and nut. provide feedback. aluminium and other non- ferrous metal. din 352 iso2 hss 6h hsse co 5 m 800 n/ mm² 1000 n/ mm² 800 n/ mm² hss hsse co 5 hss m ø1 l 1 din 352 pdf l 2 hand taps m din 352 hss, hss- left- handed thread and hsse- co 5 ground set: 3- piece taper tap: 6 - 8- thread chamfer second tap: din 352 pdf 4 - 5- thread chamfer final tap: 2 - 3- thread chamfer thread: metric, din iso 13 flanks: relief- ground also available.
higher tolerance ( iso 3) generates a rough fit with a large gap. normal tap tolerance is iso 2 ( 6h), which generates an average quality fit between screw and nut. this is used if the nut is coated, or if a loose fit is preferred. 5 m3 m4 m5 m6 pitch 0. din 2181 no/ cs/ ws code 114 xxx hss code pdf 144 xxx d p l 1 l 2 d 2 a * code no/ cs/ ws code hss m 2, 5 0,, 8 2, 1 2, m 3 0,, 5 2, 7 2, m pdf 3, 5 0,, 0 3, 0 3, m 4 0,, 5 3, 4 3, m 4, 5 0,, 0 4, 9 4, m 5 0,, 0 4, 9 4. special, super and titanium alloys. hardened steel and chilled cast iron. grey cast iron, malleable pdf and spheroidal iron. thread type x nominal diameter m2 m2.
manual screw tap set hss, din 352 3 pieces consisting of a taper tap ( form a), a second tap ( form d) and third tap ( form c) for producing metric iso standard threads by hand in accordance with din13 in through holes and blind holes in the steel, non- ferrous metals and cast iron material groups up to a strength of 800 n/ mm2. hand taps m din 352 hss, hss- left- handed thread and hsse- co 5 ground set: 3- piece taper tap: 6 - 8- thread chamfer second tap: 4 - 5- thread chamfer. manual screw tap, second tap hss, din 352 type description second tap standards din 352 material hss thread type metric thread art.
留言列表
